Automatic PCB prototyping machine
RAPIT Auto A1
RAPIT Auto A1 is a CNC machine for PCB prototyping with an automatic electric direct tool-change spindle, 10 tool holders, automatic tool calibration and PhCNC64 PS Pro software support.
Coming soon. Updated RAPIT Auto product information and photography are being prepared.
Specifications
RAPIT Auto A1 specifications
Automatic high-speed spindle operation with electric direct tool change for PCB milling, drilling and cutting workflows. No compressed air or external air compressor is required.
| Working area (X/Y/Z) | 300 x 229 x 25 mm |
|---|---|
| Max material size (X/Y/Z) | 320 x 275 x 35 mm |
| Integrated vacuum table | Standard equipment |
| Resolution (X/Y/Z) | 0.1 um (0.0039 mil) with 2.54 mm pitch screws; 0.2 um (0.0078 mil) with 5.08 mm pitch screws |
| Traverse speed (X/Y/Z) | up to 57 mm/s with 2.54 mm pitch screws; up to 115 mm/s with 5.08 mm pitch screws |
| Spindle | AC 150W, 5000...62000 RPM, software controlled |
| Spindle collet | 3.175 mm (1/8 inch) |
| Tool change | Automatic Electric Direct |
| Tool calibration | Automatic |
| Tool holders | 10 |
| Depth control | 1 um resolution |
| Max tool penetration depth | up to 10 mm |
| Dimensions (W x H x D) | 430 x 430 x 475 mm |
| Weight | 20 kg |
| Vacuum control output (SSR) | 100-240V @ 50-60Hz, 15A max |
| Power supply | 100-240V @ 50-60Hz, 150W; typical 135W, idle 20W |
| Optional input / outputs | EmStop input, Cabinet input, Service Lights 24V, RGY, GND, 100mA max |
| Software | PhCNC64 PS Pro |