Legacy technical specification
AccurateCNC A437R
Archived technical parameters for the discontinued AccurateCNC A437R PCB prototyping machine.
ATCPhCNC440 / PhCNC441Linear scales; PhSTdrive controllers with 0.1um internal resolution
Original specification
Technical parameters
| Model: | A437R |
|---|---|
| Working area (XxYxZ) | 304x229x33 mm, 12x9x1.3 inch |
| Machine design | Heavy duty aluminum and stainless steel platform |
| Machine table | 16 mm, 0.625 inch stress relieved high stability aluminum alloy |
| Tool holders | 12 |
| Internal Resolution (X,Y,Z) | 0.1 μm , 0.0000039 inch (0.0039 mil) * |
| Positioning Repeatability (X,Y,Z) | 1 μm , 0.000039 inch (0.039 mil) |
| Absolute Accuracy (X,Y) | 7.5 μm at 254 mm (10 inch) ** |
| Tool penetration control | Constant Automatic Surface Tracking - CAST™ , surface tracking relative to tool tip, fully programmable fully automatic. Uses a linear gauge with 1 μm , 0.039 mil resolution. |
| Tool Calibration | Precise Linear Gauge on the Z axis (0.039 mil, 1 micron resolution) |
| Spindle speed [rpm] | 5,000 to 100,000 programmable |
| Spindle motor | 3-phase induction motor; 100K/300W |
| Spindle drive | PhACdrive ™ (sensorless, vector control, DSP based) |
| Tool collet | 3.175 mm, 0.125 inch |
| Spindle run out | 5 μm, 0.0002 inch max |
| Collet control | Pneumatic direct, 6-8 Bars (85-115 PSI) |
| Tool Change | Automatic |
| Minimum drill diameter | 0.1 mm (4 mil) |
| Minimum track size | 0.1 mm (4 mil) |
| Minimum gap size | 0.1 mm (4 mil) |
| Drilling speed | Up to 180 drill cycles per minute (varies with the distance between holes) |
| Homing system | Gold plated precision needle contacts |
| Max Travel speed (X,Y,Z) | Up to 150 mm/s, 5.9 inch/s |
| X/Y/Z positioning system | 2 phase bipolar stepper motors with servo feedback, precision lead screws with anti-backlash nuts Precise Linear Gauge on the Z axis ( 1 μm) |
| X/Y/Z stepper drivers | PhSTdrive ™ SMART stepper drive with servo closed loop control (DSP based), supporting temperature compensation for the screw and material ** |
| Interface to PC | USB 2.0 with galvanic isolation (>1kV) |
| Spindle and vacuum start-stop | Program controlled, manual override available |
| Feed rate and Spindle speed | Program controlled, manual override available |
| Dimensions (WxDxH) | 583x506x330 mm , 22.9x19.9x13 inch |
| Weight | 33 Kg, 72 Lbs |
| Power Supply | 100~240VAC, 50/60Hz 415W (45W stand by) |
| Machine control system | PhCNC440 ™ 32 bit high performance CNC motion controller (up to 8000 command/sec) |
| Machine control programs | Industry standard G & M codes ASCII, PHJ job files |
| Control and Edit software | PhCNC & PhCNC64, Windows based (Windows XP / Vista / 7 / 8 / 10) x86 & x64 Supporting firmware update for PhCNC440 ™ , PhACdrive ™ & PhSTdrive ™ (X/Y/Z) |
| Imports | Gerber RS-274X files; Excellon Drill and Definition files; ODB++ files; AutoCAD DXF 2D files; PhCNC printer driver. |
| Camera | Fiducial / inspection video camera / microscope (USB 2.0) included. |