Legacy software support

Legacy PhCNC Software Archive

This page helps owners of legacy PhCNC-based CNC machines identify the correct software version for their controller.

The listed machine models are no longer in production. This archive is maintained for existing users of supported legacy machines.

PhCNC CNC software screen — PhCNC CNC mode.

Digital signing: Every PhCNC release is digitally signed by TELENET EOOD. The USB drivers for the machines are also digitally signed with an EV Code Signing certificate from TELENET EOOD and Microsoft.

Installation note: Installing the wrong PhCNC software version will not damage the machine or controller; the software will simply not find the machine. The 32-bit and 64-bit versions can be installed at the same time. When available, the 64-bit version is usually about two times faster.

Windows compatibility: 32-bit versions support Windows XP through Windows 11. 64-bit versions support Windows 7 through Windows 11.

Installers

Software installers

PhCNC B440 v6.4.0 (last release 22.Jul.2026)

For machines equipped with PhCNC440 controller.

Included firmware: PhCNC440 v1.1.5.167, PhACdrive v1.0.2.022, PhSTdrive v1.0.2.205

Firmware is included in PhCNC and is updated automatically when the installed controller firmware is older.

PhCNC64 B44064-bit Windows installer - 9.4 MB

PhCNC B44032-bit Windows installer - 7.7 MB

PhCNC B441 v6.4.0 (last release 22.Jul.2026)

For machines equipped with PhCNC441 controller.

Included firmware: PhCNC441 v1.1.5.167, PhACdrive v1.0.2.022, PhSTdrive v1.0.2.205

Firmware is included in PhCNC and is updated automatically when the installed controller firmware is older.

PhCNC64 B44164-bit Windows installer - 9.4 MB

PhCNC B44132-bit Windows installer - 7.7 MB

PhCNC A360 v6.4.0 (last release 22.Jul.2026)

For legacy machines equipped with a PhCNC360 controller.

Included firmware: PhCNC360 v1.1.3.053, PhACdrive v1.0.2.022

Firmware is included in PhCNC and is updated automatically when the installed controller firmware is older.

PhCNC64 A36064-bit Windows installer - 9.0 MB

PhCNC A36032-bit Windows installer - 7.0 MB

PhCNC A350 v6.4.0 (last release 22.Jul.2026)

For the oldest A350 machines only.

PhCNC A35032-bit Windows installer - 6.9 MB

Resources

Support files

Additional files preserved for testing, integration and documentation.

PhCNC MODBUS-TCP API

API document - 325.9 KB

PhBASIC R1

PhBASIC document - 118.5 KB